How Do I?
and
Printer Services
. The How Do I? tab is shown
below. The Printer Services tab can be accessed
from the HP DeskJet 930C Toolbox by double-
clicking the HP Toolbox icon in the HP DeskJet
Utilities group in the Program Manager.
You can also access Printer Services from the HP DeskJet 930C Series Printer
Properties dialog box (see page A-3). Simply click a tab, then choose an option.
How Do I?
Click a button to read
instructions on:
• Replacing the print cartridges
• Loading paper
• Changing print settings
A-5
Minimum Printing Margins
The printer cannot print outside a certain area of the page,
so you must make sure the contents of your document fall
within the printable area.
When you use nonstandard paper sizes and select the
User Defined Paper Size
setting from the
Setup
tab on the
HP Printer Properties dialog box, the paper width must be
between 77 and 215 mm (3 and 8.5 inches) and the paper
length must be between 127 and 356 mm (5 and 14 inches).
Letter, Legal, and Executive Paper
A4 Paper
A5, B5, and User Defined Paper Size
Cards (3 x 5, 4 x 6, 5 x 8, and A6)
Hagaki Postcards
Envelopes
Banners, A4 (210 x 297 mm, 8.27 x 11.7 in)
Banners, Letter (8.5 x 11 in.)
Photo with tear-off tab 112 x 152 mm
(4 x 6.5 in.)
DOS margins can vary. See the manual for your specific DOS
program for more information.
Left:
6.4 mm (0.25 in.)
Right:
6.4 mm (0.25 in.)
Top:
1.8 mm (0.07 in.)
Bottom:
11.7 mm (0.46 in.)
Left:
3.4 mm (0.134 in.)
Right:
3.4 mm (0.134 in.)
Top:
1.8 mm (0.07 in.)
Bottom:
11.7 mm (0.46 in.)
Left:
3.2 mm (0.125 in.)
Right:
3.2 mm (0.125 in.)
Top:
1.8 mm (0.07 in.)
Bottom:
11.7 mm (0.46 in.)
Left:
3.2 mm (0.125 in.)
Right:
3.2 mm (0.125 in.)
Top:
1.8 mm (0.07 in.)
Bottom:
11.7 mm (0.46 in.)
Left:
3.2 mm (0.125 in.)
Right:
3.2 mm (0.125 in.)
Top:
1.8 mm (0.07 in.)
Bottom:
11.7 mm (0.46 in.)
Left:
3.2 mm (0.125 in.)
Right:
3.2 mm (0.125 in.)
Top:
1.8 mm (0.07 in.)
Bottom:
11.7 mm (0.46 in.)
Left:
3.4 mm (0.134 in.)
Right:
3.4 mm (0.134 in.)
Top:
0.0 mm (0.00 in.)
Bottom:
0.0 mm (0.00 in.)
Left:
6.4 mm (0.25 in.)
Right:
6.4 mm (0.25 in.)
Top:
0.0 mm (0.00 in.)
Bottom:
0.0 mm (0.00 in.)
Left:
3.2 mm (0.125 in.)
Right:
3.2 mm (0.125 in.)
Top:
3.2 mm (0.125 in.)
Bottom:
3.2 mm (0.125 in.)
System Requirements
Be sure your computer meets the following system requirements:
✻
If you are printing at 2400 x 1200 dpi, you will need at least 400 MB of free hard disk space.
Operating System
Minimum Processor Speed
Required RAM
Required Free Hard Disk Space
✻
Microsoft Windows NT 4.0
Pentium 66 MHz
32 MB
40 MB
Microsoft Windows 95 or 98
Pentium 66 MHz
16 MB
40 MB
Microsoft Windows 3.1x,
Enhanced mode only
Pentium 66 MHz
8 MB
40 MB
MS-DOS Version 3.3 or greater
486
4 MB
5MB
A-6